Smart Venues and Stadiums

• Eight Q&As added (no previous version, so all are new), covering demonstration site deliverables, demonstration conditions, ISAC hardware, aggregate throughput sizing, IFC 510/NFPA 1225 coverage, first-responder devices and MCX, Monthly Status Reports, and spectrum/as-a-service.
• Q1 clarifies a deliverable: the "factory-representative" demonstration site bullet was carried over from DV032 in error and does not apply to DV031; the applicable item is integration into an RTEC-affiliated network and/or a venue-representative site.
• Q2 allows non-live demonstrations: a live event is not required; a non-event-day venue test with physical RUs/UEs and synthetic load reproducing peaks is acceptable, with documentation of fidelity and load modeling.
• Q3 sets ISAC rules: no specific ISAC hardware is identified; a co-located SDR receiver using the RAN's own signals counts, but a separate sensing-only network does not; a surrogate target is acceptable instead of a real drone flight.
• Q4 shifts throughput sizing to performers: they must propose and justify venue footprint, cell count, bandwidth and reuse; the 150 MHz CBRS limit applies per location, not in aggregate.
• Q5 and Q6 set public-safety scope: coverage benchmarks apply, but the platform must coexist with existing ERRCS/BDA; LMR/P25 interworking and FirstNet access are out of Phase II scope.
• Q7 and Q8 address reporting and spectrum: MSRs to the working group must be non-proprietary, with OCUDU membership optional and allowability decided under FAR 31.205-43; CBRS is the expected band.

Status changed from status: Pre-Release to status: Open.

Scope, description information changed.

New opportunity: Smart Venues and Stadiums