Active Government Funding Opportunities

This SBIR seeks malleable, cost-effective metastructures that protect maritime communications and radar systems while withstanding salt, UV, and water damage. The solution must offer broadband frequency selectivity across multiple bands, conform to complex geometries, and outperform current expensive, manufacturing-constrained alternatives.

This RFP seeks advanced overlay/bond coatings that resist hot corrosion in Navy marine gas turbine engines. The improved coatings must eliminate salt and sulfur-induced degradation in turbine blades to extend engine service life and reduce maintenance removal cycles.

This SBIR seeks an AI-powered navigation tool integrating satellite imagery, ship sensors, and ice forecasts to optimize Arctic route planning. The system addresses dangerous, manual ice navigation processes by providing automated 12-96 hour sea ice forecasts and tailored routing options based on vessel specifications.

This RFP seeks a lightweight dual-wavelength LiDAR and passive imaging system for Group 2 UAVs to rapidly characterize shallow coastal environments. The integrated solution addresses limitations of current single-sensor approaches by enabling real-time bathymetry, underwater target detection, and seafloor characterization in littoral zones.

This RFP seeks development of 3D heterogeneously integrated photonic imaging sensors that stack detector, readout electronics, and optical interconnect layers to overcome copper bandwidth limitations in advanced military EO/IR focal plane arrays. The solution enables concurrent wide field-of-view, high resolution, and ultra-high frame rate imaging through innovative vertical integration and cryogenic-compatible design.

This SBIR seeks regenerative AI-based agents for naval operations that monitor real-time tactical activities, detect anomalies, and autonomously adapt engagement strategies when unexpected events disrupt approved plans. The solution addresses vulnerabilities in human-dependent operational planning by leveraging multimodal intelligence data to maintain mission effectiveness against near-peer adversaries.

This SBIR seeks a wideband digital recording system capable of capturing high-volume sensor data at the tactical edge to support AI/ML algorithm development. The device must fit within compact rack space while meeting strict security and environmental standards for deployment on military platforms.

This SBIR seeks to develop robocasting technology for manufacturing large-format textured piezoelectric ceramic sensors with improved performance and lower production costs. The innovation addresses critical supply chain vulnerabilities in undersea sensor components while enabling performance enhancements for Navy sonar applications.

This SBIR seeks an auto-focus signal processing capability for sonar hydrophone arrays that automatically optimizes detection parameters—like focus range and frequency band—to identify maritime contacts with minimal operator workload. The innovation combines multiple processed data volumes to present operators with a single, high-confidence display containing the best signal representation across all detection scenarios.

The Navy seeks light mitigation technology to reduce bridge lighting's negative effects on night vision and crew situational awareness during darkened operations. Solutions must comply with military human engineering standards and include adjustable work lights and display overlays that preserve crew safety without permanent modifications.

The Navy seeks superconducting magnetic energy storage (SMES) technology to rapidly store and discharge power for pulsed weapons systems aboard all-electric ships. This high-rate intermittent storage prevents electrical grid disruption and generator damage while supporting emerging naval combat loads.

This SBIR solicits nonlinear optical dyes embedded in sol-gel glass to protect military EO/IR sensors from frequency-agile lasers and dazzlers. The technology must rapidly switch from transparent to blocking states while maintaining ambient light transmission and surviving 10,000+ pulses without degradation.

This SBIR seeks a compact, battery-operated mid-wave infrared hyperspectral camera using photonic crystal integration to enable real-time video imaging of hard-to-detect targets. The innovation addresses current systems' bulk, slow frame rates, and power consumption by delivering 500+ spectral bands at video speeds for field reconnaissance and target detection.

The Navy is seeking an innovative, modular software-defined radio system optimized for minimal size, weight, and power to integrate across multiple aircraft platforms. The open-architecture design must support diverse communication waveforms while meeting strict security and electromagnetic compatibility standards.

This RFP seeks robotic systems to automate expeditionary airfield matting assembly, currently a manual and hazardous task performed by Marines. The solution should handle heavy mat manipulation on austere terrain while reducing personnel risk and improving operational readiness.

This RFP seeks a universal Hold-Up Battery tester with integrated low-voltage alerts for Type 1 encryption devices, reducing costly depot returns and downtime by enabling timely battery replacement monitoring and maintenance.

The Navy seeks a compact, high-gain directional sonobuoy array for enhanced anti-submarine warfare detection in deep waters. The system must fit within standard A-size deployment constraints while delivering long-range passive acoustic detection and directional sensitivity for maritime patrol aircraft operations.

The Navy seeks a low-cost, multi-frequency dipping sonar transducer combining anti-submarine and mine countermeasure capabilities for helicopter deployment. This unified system reduces costs, logistics complexity, and mission coverage gaps while maintaining compatibility with existing naval aircraft platforms.

This RFP seeks automated flight control technology enabling aircraft to maintain precise formation positions within lead aircraft wake patterns for fuel savings of 10-20%. The solution must achieve robust station-keeping across mixed aircraft types with minimal hardware modifications and no additional data-link requirements.

This RFP seeks a modeling and simulation tool for generating high-fidelity, thermally-accurate virtual EO/IR objects—such as clouds and debris fields—to enhance developmental testing of missile warning and infrared countermeasure systems. The solution must support real-time scene generation across multiple resolutions and frame rates for realistic survivability assessments in cluttered battlefield environments.

Water propulsion and operator control improvements are needed for the Amphibious Combat Vehicle to enhance maneuverability in surf zones and reduce operator workload. The solution must simplify the human-machine interface, improve responsiveness, and fit within strict dimensional constraints while maintaining performance in shallow-water environments.

The Navy seeks an advanced passive Structural Health Monitoring system to detect and characterize hull cracks in real time, addressing limitations of current strain-gauge approaches. This automated solution would enable ships to identify structural damage early, reducing inspection costs and operational risks at sea.

This SBIR Direct to Phase II seeks to integrate Highly Loaded Grain (HLG) propellant technology into the 2.75" Mk66 rocket motor to increase range by 30% while maintaining affordability and compatibility with existing systems. The advancement addresses the need for extended-range capabilities in current unguided and precision-guided munitions platforms.

This RFP seeks an AI/ML-enabled portable diagnostic device to rapidly identify faults in military airborne fiber-optic networks with centimeter-level precision, reducing aircraft downtime and intrusive panel removals during maintenance troubleshooting operations.

The Navy seeks domestic production of metal organic precursors like TDMAZ for microelectronics and advanced ceramics manufacturing. This initiative aims to establish a U.S.-based supply chain for critical chemical feedstocks essential to atomic layer deposition and composite material production.