Active Government Funding Opportunities

The Army is seeking a small business to supply 25 identical 11-inch Apple iPads, one Microsoft Surface notebook, and 25 matching tablet stands for general use. This is a standard commercial equipment purchase rather than new technology development.

The Department of War seeks a ground-based, affordable mass (G-BAM) precision payload delivery system using commercial technologies to provide cost-effective, high-volume alternatives to expensive hypersonic systems. This initiative addresses the need for sustained "magazine depth" capability against peer adversaries while maintaining operational affordability.

The Army seeks autonomous and minimally-manned ground and aerial systems for sustainment and recovery in contested environments where GPS and communications are degraded. Solutions must operate with minimal oversight across payload transport, power generation, refueling, and vehicle recovery to reduce soldier exposure and maintain mission continuity.

The Army is seeking new ICP-OES spectrometers and autosamplers for in-service oil analysis under ASTM D5185, for integration with existing lab data systems. It's a small-business set-aside requiring brand-name-or-equal products with CSV data export.

The Army is seeking 100 total units of 4140 steel mechanical tubing (7.0" OD x 2.0" wall, ASTM A519) in cut lengths of 2 to 10 feet, with certification documentation required. This is a standard commercial material procurement, open to small businesses on a brand-name-or-equal basis.

A contractor is sought to plan and run the Army JROTC Leadership and Academic Bowls, including online competitions, a resident championship, an essay contest, and livestreamed award ceremonies. It supports cadet leadership development, academic skills, and program visibility.

Public TReX II listing for TReXII-RFS-27-01 (PM TRADE): 120mm Mortar Training System. Official RFS package is members-only. RallyProp tracks new listings and date changes from the public table.

Seeks a contractor to perform heat treatment and mechanical property testing on E81 tube and cap material for the Watervliet Arsenal in New York. This is a service-based testing requirement supporting existing Army materials production and quality verification.

Seeks a manufacturer to produce gear racks to a specified engineering drawing for the M284 155mm cannon used by the Army. This is a standard fabrication and delivery procurement for a defined existing part.

This SBIR Phase II solicitation seeks an automated software platform that ingests Technical Data Packages (3D CAD, drawings, BOMs) to autonomously generate collision-free robotic inspection trajectories, eliminating manual programming. The solution targets aerospace quality control bottlenecks by compressing setup timelines from days to hours for agile manufacturing environments.

The Army is seeking bulk steel coil stock in ash grey and polar white (26 gauge, about 42-43 inches wide) to be formed into R-panel siding. This is a standard commercial materials purchase for construction use, delivered F.O.B. destination within 30 days.

This Army Joint Munitions Command RFQ seeks new W10x19 and W6x25 structural steel I-beams, delivered F.O.B. destination within 30 days. It is a standard commercial product purchase with no research or novel technology component.

The Army is seeking a quote for 8-inch steel structural members, including eave beams and C and Z purlins, in 20-foot lengths for building framing. This is a standard commercial products purchase of existing items, with no research or new technology development involved.

A Department of Defense solicitation seeking a progressive design-build team for a new blood donor center at Joint Base San Antonio. The project covers facility design, construction, and phased transition of existing operations, with an industry day planned for October 2026.

A construction and maintenance solicitation from the Army Corps of Engineers for repairs to the fueling system at Mather, California. The work covers tank upgrades, containment basin drainage fixes, pavement replacement, and installation of an automatic tank gauging system.

Seeking qualified construction firms to build a 67,833 SF two-story secure facility at Kirtland AFB with controlled workspaces, a 200-seat auditorium, and antiterrorism/force protection features. Relevant for contractors experienced in ICD 705 secure construction.

Seeks a manufacturer to produce new Cap, Housing Assemblies per drawing for 81mm mortar systems, delivered to Watervliet Arsenal in New York. This is a standard firm-fixed-price procurement of an existing defined part, subject to export-controlled technical data restrictions.

NASA's Research Technology Mission Directorate seeks host facilities for the Deep Space Autonomous Robotics Challenge, advancing multi-agent robotic systems that prepare lunar and Martian infrastructure before crews arrive.

The Navy is seeking a contractor to build a 1,750 sq ft concrete storage pad with fire-rated walls, a sloped roof, fencing, and fire detection for post-test lithium-ion batteries. It addresses safe, secure handling of used batteries after testing.

The Army Corps of Engineers' ERDC is seeking a sole-source award to Emerald Publishing for site licenses to ICE Publishing journal collections in civil engineering. Interested vendors may submit capability statements, though no competitive solicitation will be issued.

The Army Corps of Engineers ERDC is seeking to sole-source a BioOne Complete annual journal subscription for one physical site. It provides access to scientific journal content for research staff, with no competitive solicitation planned.

The Army Corps of Engineers plans a sole-source award to ASCE for multi-site licenses to civil engineering journals, e-books, standards, and proceedings. It supports researchers and engineers by providing access to a comprehensive technical literature collection.

ERDC is seeking temporary pop-up shelter solutions, fitting a 16' x 32' concrete pad, for evaluation at Fort Leonard Wood's CBITEC contingency base testing facility. It addresses the military need for rapidly deployable shelter in real-world conditions, with selected solutions potentially showcased at Engineer Regimental Week.

The Army is seeking quotes for new electrically heated tanks with agitation, dispensers, and a heated paraffin dropper for melting and dispensing wax at Yuma Proving Ground. It is a small-business set-aside for commercial equipment, with delivery required within 30 days.

The Navy seeks improved fire-resistant joiner bulkheads for naval vessels that contain compartment fires while meeting strict weight, cost, and dimensional constraints. Solutions must leverage advanced materials like intumescent coatings or high-performance fibers while passing rigorous fire, shock, and toxicity certification standards.