Engineered Microstructures for Enhanced IR Aperture Performance
AI Overview
The Navy seeks innovative manufacturing processes to produce IR-transparent composite ceramics with nanoscale microstructures and minimal porosity at production scale. This enables advanced infrared aperture components that maintain optical clarity and mechanical strength under extreme thermal conditions.
This summary is AI-generated from the official solicitation.
Key Details
Official Description
The Navy has demonstrated within its laboratories that a composite ceramic exhibiting IR transparency can be produced with distinct phases, microstructural feature sizes below 100 nm in all phases, and porosity content below 0.1% on component parts as large as 0.4 inch in lateral dimension. Phase identity, crystal structure, phase chemistry, microstructure feature size, and porosity content were established via X-ray diffraction (XRD) and scanning electron microscopy (SEM) cross-sections with en...
Change History
Informational change · Description
Engineered Microstructures for Enhanced IR Aperture Performance
Added 1 Q&A (Q1). It asks whether 4.0 microns is an adequate MWIR range to be of interest for this topic.
- No answer is posted yet, so the question is effectively "Response Pending." The government has not said whether a 4.0 µm upper limit meets its needs.
- Why it matters: the question suggests the MWIR band is a possible fit or eligibility issue. Offerors whose sensors, materials, or sources stop near 4.0 µm (short of the full 3–5 µm MWIR band) can't yet tell if they will be seen as responsive.
- What to do: don't assume 4.0 µm is acceptable. Check the topic text for a specified wavelength range, and watch for the answer before committing proposal effort. If the range is critical to your approach, consider submitting your own question to the topic office.
Informational change · Status
Engineered Microstructures for Enhanced IR Aperture Performance
Status changed from status: Pre-Release to status: Open.
Engineered Microstructures for Enhanced IR Aperture Performance
New opportunity: Engineered Microstructures for Enhanced IR Aperture Performance
Similar Opportunities
US Production of Ultra-High Temperature Ceramic-Yielding Preceramic Polymers
Due November 25, 2026
ActiveScalable Hard-mask materials with Improved Etch resistance and Low Degradation for Extreme-aspect-Ratio fabrication (SHIELDER)
Due October 21, 2026
ActiveDesign of RoomTemperature THz and Infrared Sensing Devices Using Non-Toxic, Supply-Chain Secure Material Platform
Due October 21, 2026
Get Alerts for Opportunities Like This
RallyProp monitors thousands of funding sources and sends instant alerts when opportunities match your technology and capabilities.
Start Free Trial